Joda company news

New: Rusal Due To Us Sanctions To Reduce Aluminum Prices And Aluminum Company's Share Price Rebound...

YOUR POSITION: Home > Product New

Adjust the Break for Anode Jacking System

2017-05-12 17:26:30

Anode Jacking System Adjust Breakanode jacking system

Adjust the Break for Anode Jacking System

1. After 4 months use of the anode jacking system, the break will not work well due to the enlarged break clearance as the worn break pad.

2. Loose the socket bolt 1 with 8mm socket head wrench counterclockwise; loose nut 2 counterclockwise with 19 open-end wrench.

3. Turn the socket bolt 1 with 8mm socket head wrench clockwise, adjust the distance between break magnetic 3 and break disc 4 to make it within 1mm evenly.

4. After adjust the distance, turn the lock nut 2 clockwise with 19 open-end wrench and at the same time watch the distance between the break magnetic 3 and break disc 4 to make sure the distance is within 1mm evenly at 4 points.

5. Turn on the electricity and watch if the break disc works smoothly.

More information about aluminum smelter industry will be found on our website: www.anodejackingframe.com and you can also send us email to [email protected] if you have any questions about aluminum smelter equipment.

NEWS

If you have any questions, please contact us immediately, we will reply in the shortest

Copyright @ 2017 ZhengZhou Joda Technology Co., Ltd. All Rights Reserved